All Categories

PGS Series Home Energy Storage System All in one 11KW-16KWH

Appurtenance:
  • Key Features
  • Specification
  • Product Description
  • Related Products

Key Features

· Elegant and stylish,floor installation.

· Wide range of selectable mains input voltage.

· Built in lithium battery with extremely long life 8000 cycles.

· Long lifespan: 10+ years life design.

· Supports RS485 / CAN / SNMP / Wifi / Bluetooth monitoring function.

· Hybrid inverter,with built-in batteries and MPPT solar controller.

· Selectable priority between solar,batteries or mains to feed the output.

· Protection for over-discharge,overload,over-temperature,short-circuit protection etc.

· Stacked design facilitates inverter maintenance and battery capacity expansion.

Specification

Technical Specification:
Model PGS 11KW+16KWH
Rated Capacity 11000W + Battery 16.08KWH
AC Input
Rated Input Voltage 208 / 220 / 230 / 240 VAC
Input Voltage Range 170-264VAC(For UPS Mode); 90-280VAC(For Home Appliances)
Frequency Range 40 - 70 Hz(Auto Sensing)
AC Charging Current Range 2 – 120A
Max.Input Current 50A
PV Input
Solar Charging Type MPPT
PV Max.Input Power 5500W * 2
MPPT Tracking Voltage Range 60 ~ 500VDC
Max.PV Input Voltage 500VDC
PV Charging Current Range 2~160A
Max.Charging Current 160A
Output
Rated Output Power 11KW
Rated Output Voltage (220V - 240V) ± 5%
Output Frequency 50 / 60Hz ± 0.1%
Peak Power 11000W * 2
Overload Capacity (Battery Mode) 5.5s@≥140% Load 10.5s@100%~140% Load
Peak Efficiency >94% Battery Mode; >99% Line Mode
Transfer Time 10ms
Dual Output Function Yes
Max.Main Output Power 11000VA / 11000W
Max.Second Output Power 5500VA / 5500W
Battery
Cell Technology LiFePO4
Battery Energy 16.08KWH
Battery Voltage 51.2VDC
Fully Charging Voltage (FC) 58.4VDC
Fully Discharging Voltage (FC) 41.6VDC
DOD 80%
Product General Data
Designed Life-span Cycle 8000
Display LCD & LED
Communication Interface RS485,CAN(Standard); RS232(Optional); SNMP/Wifi/Bluetooth(Optional)
Parallel Interface RS485 & CAN
Operation Environment Temperature 0~40℃
Storage Environment Temperature -15~60℃
Environment Humidity 20%~95%
Operation Altitude <3000m
Cooling Mode Active Cooling
Noise Emission <50db
Physical
Product Dimensions(mm)W*D*H 550*361*1274
Product Weight(kg) 156
Note : Product Specification are Subject to Change Without Further Notice.

Product Description

The Power Station That Looks Like Furniture

You have solar panels on the roof. On a sunny day they produce more power than your home can use, and you watch all that free electricity flow back into the grid for a few pennies, or just go to waste. Then the sun goes down, and you're back to buying expensive utility power all evening. A power wall would fix that, but most of them look like a science project—multiple boxes, cables snaking everywhere, a wall-hung battery that dominates the garage. The PGS Series takes a different approach. It's a complete home energy storage system inside a single, upright cabinet that sits neatly against a wall and doesn't scream "industrial equipment."

One Box, Everything Inside

Open the PGS and you won't find a tangle of third-party components. The hybrid inverter, the lithium battery pack, and the MPPT solar charge controller are all integrated at the factory. No wall-mounting a battery here and an inverter there. No sizing cables or worrying about compatibility between brands. It's an all-in-one floor-standing unit that gets delivered, positioned, and connected. For a homeowner who wants energy independence without becoming an amateur electrician, that simplicity is the whole point.

A Battery That Outlasts the Mortgage

Inside the cabinet is a lithium iron phosphate (LiFePO4) battery rated for 8,000 cycles. If you cycle it fully once a day—charge from solar, discharge at night—that works out to more than 20 years of service. Most people won't push it that hard; in practice, you might only cycle 60% of its capacity on an average day. So the system is engineered to run well beyond a decade without anyone touching the cells. Compare that to a lead-acid bank that needs watering, equalizing, and replacement every three to five years, and the total cost of ownership tips firmly in the PGS's favour. No maintenance. No acid. Just a quiet box in the corner that keeps working.

11kW of Inverter Muscle, with Room to Grow

The built-in inverter is rated for 11 kilowatts of continuous output. That's enough to run a whole household simultaneously: lights, refrigerator, well pump, air conditioner, washing machine, and a home office full of electronics. Start a compressor or a small workshop tool and the inverter handles the inrush without blinking. The battery starts at 16 kilowatt‑hours of storage—roughly enough to power essential loads overnight—and because the design is stackable, you can add extra battery modules later without replacing the inverter. Need 32kWh or 48kWh? Just clip on another unit. The system scales up without rewiring or buying a second box.

Smart Hybrid Operation That Runs on Solar First

During daylight hours, the PGS directs solar power from your panels straight into your home's AC loads. Whatever is left charges the battery. When the battery is full, any further surplus is managed according to your settings. At night, the battery silently takes over from the grid and runs your house until the sun comes back up. If the grid fails—storm, blackout, rolling outage—the PGS switches to backup mode automatically, too fast for your router to drop or your computer to reboot. You might not even notice the transition.

You set the priority: solar first, battery second, grid as a backup. Or, if you're on time‑of‑use billing, you can configure it to charge from the grid during off‑peak hours when electricity is cheap, then discharge to your loads during the expensive evening peak. The system manages it automatically. No separate energy manager is required.

Monitoring That Fits in Your Pocket

The PGS talks to your phone. With built‑in WiFi, Bluetooth, and support for RS485, CAN, and SNMP, there's a communication path that works whether you're on the couch or 300 miles away. The companion app shows you solar generation, battery state of charge, household consumption, and grid status in real time. You can see exactly how much money you saved today versus drawing from the utility. No subscription, no cloud dependency—just a direct view into your own power plant.

Generator Friendly, Grid Tolerant

The inverter's AC input window is wide enough to accept power from a portable generator without faulting, making it useful for extended off‑grid scenarios or homes with unreliable grid power. If your utility voltage sags to 90V or swells to 280V, the PGS stays connected and conditions the power. And protections—over-discharge, overload, over-temperature, short circuit—are all standard, with automatic restart logic that doesn't force you to walk out to the garage every time there's a grid wobble.

It Doesn't Look Like Industrial Equipment

Most energy storage systems are functional but homely—plain metal boxes with heat sink fins and warning labels. The PGS was designed for a home, not a factory. The cabinet is clean, modern, and neutral enough to stand in a utility room, a hallway alcove, or even a finished basement without offending the eye. It occupies about the floor space of a small bookshelf. Installation is simple: place it against a wall, wire the AC input and output, connect the PV, and switch it on.

Who Should Consider the PGS

The PGS Series is built for homeowners who have solar panels—or are planning to install them—and want to take full control of their energy. It's for families who are tired of power outages, for anyone on time‑of‑use billing who wants to shift their consumption to cheaper hours, and for people who would rather store their own sunshine than sell it back to the utility for a fraction of what they'll pay to buy it back after sunset. It's also a practical fit for small guest houses, remote cabins, or retirement homes where reliable, quiet backup is non‑negotiable.

The Bottom Line

The PGS Series Home Energy Storage System puts an 11kW hybrid inverter, a long‑life lithium battery, and an MPPT solar controller into a single, good‑looking cabinet that doesn't demand a dedicated room. It runs your home from solar when the sun shines, from battery when it doesn't, and keeps the lights on when the grid goes down—all while giving you a clear view of your energy life from your phone. If you're done renting your electricity from the utility and want a cleaner, smarter way to use the power your roof already generates, this is the box that makes it happen.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000