· CPU controlled
· Auto re-starts when AC recovers
· Silence setup
· Automatic charging (offline charging)
· Battery low voltage protection
· Overload & short circuit protection
· Wide input voltage range
· Built-in BMS (Battery Management System)
· Over temperature alarm and protection
| MODEL | F800 - Li | F1200 - Li |
|---|---|---|
| Capacity | 800VA/480W | 1200VA/720W |
| AVR | 3 Steps of AVR, CPU Controlled | |
| INPUT | ||
| Input Voltage | 110 / 120Vac or 220 / 230 / 240Vac | |
| Input Voltage Range | 85 - 150Vac / 145 - 290Vac | |
| Frequency Range | 45 - 65Hz | |
| OUTPUT | ||
| Output Voltage | 110 / 120Vac or 220 / 230 / 240Vac | |
| Output Voltage Range | 102 - 132Vac / 200 - 255Vac | |
| Output Frequency | 60 ± 0.5Hz or 50 ± 0.5Hz (Auto sensing) | |
| Output Wave Form | PWM (Battery Mode) | |
| Transfer Time | Typical 2 - 6ms, 10ms Max | |
| Charger Port | USB Charger (Front Panel) | |
| BATTERY | ||
| QTY. & Capacity of Battery | LiFePO4 12.8V75Wh | LiFePO4 25.6V150Wh |
| Charger Period | 4 Hours | |
| PROTECTION & FUNCTION | ||
| Protection | ① Built-in BMS (Battery Management System) ② Battery low voltage protection ③ Overload protection ④ Short circuit protection ⑤ Over temperature alarm and protection |
|
| Function | ① Auto re-starts when AC recovers ② Silence setup ③ Automatic charging (offline charging) |
|
| MANAGEMENT | ||
| RJ45/11 & USB | Optional | |
| Display | LED | |
| ENVIRONMENT | ||
| Environment of Performance | Temperature 0℃ – 40℃, Humidity 20% – 90% | |
| Noise Level | ≤ 40dB (1m) | |
| Machine Size.D*W*H(mm) | 225*85*141 | 305*85*141 |
| Package Size.D*W*H(mm) | 300*278*440(4pcs) | 372*278*440(4pcs) |
| Net Weight (Kgs) | 3.3 | 5 |
| Gross Weight (Kgs) | 15.6(4pcs) | 23.2(4pcs) |
| Compared to Lead-Acid Battery UPS | ||
| Backup Time | LiFePO4 UPS: 100W Load ≈ 30min | 200W Load ≈ 33min |
| Lead Acid UPS: 100W Load = 27min (9AH*1) | 200W Load = 19min (7AH*2) | |
| Cycles Life | Lead Acid Battery 300 Cycles / LiFe04 Battery 1000 Cycles | |
| *Product Specifications are Subject to Change Without Notice. | ||
The Silent Workstation Protector That Doesn't Weigh a Ton
You've got a proper desktop setup—PC, maybe a big monitor, external drives, a printer, the whole home office rig. You know a power flicker can trash an unsaved project or slowly degrade your hardware with constant hard shutdowns. But every time you look at a traditional UPS, you picture a hulking lead-acid box squatting under your desk, humming, and beeping like a smoke alarm with a low battery the moment the power blips. The F-Li Series at 800VA and 1200VA changes that picture entirely. It takes the same lithium iron phosphate (LiFePO4) chemistry that's in the smaller F-Li units—safe, long-lasting, and far lighter—and scales it up to keep a full workstation running through the chaos.
Lithium Where You Feel It: Weight, Size, and Years of Service
Pick up a standard 1200VA lead-acid UPS and you'll feel the heft immediately. The F-Li uses a built-in LiFePO4 pack that cuts the weight significantly. You can slide it onto a shelf or tuck it under a standing desk without worrying about whether the furniture can take it. More importantly, LiFePO4 doesn't degrade the way lead does. You're looking at thousands of charge-discharge cycles, not hundreds. For a home office that sees a handful of short outages a month, that battery will still be holding strong when your current PC is ancient history. No wrestling with a heavy battery swap every two years. No wondering if today's the day the runtime finally falls off a cliff.
Silence Mode: The Feature You'll Brag About
Let's be honest about UPS beeping: nobody ever said "I wish my backup power made more noise." The F-Li has a dedicated silence setup. With a quick button press, you tell the unit to keep its mouth shut when it's running on battery. The power goes out, the inverter kicks in, and the room stays quiet. If you work in a shared space, record audio, or just have the UPS in a bedroom where the router lives, this isn't a luxury—it's the difference between a device that helps and a device that drives you mad. And because the silence mode is a deliberate setting, not a disabled buzzer you have to tear open the case to reach, it remains a fully supported feature.
A BMS That Treats the Battery Like an Investment
Under the hood, the LiFePO4 battery is paired with a genuine Battery Management System (BMS) that lives inside the pack. It's not a dumb sensor that trips only when something's already gone wrong. It actively balances the cells, monitors each one's voltage and temperature, and talks to the UPS's CPU to prevent over-charge and over-discharge before they happen. Alongside the BMS, the unit packs over-temperature alarm and protection. If the UPS ends up in a poorly ventilated cabinet on a summer afternoon and starts to cook, it will warn you and, if necessary, shut itself down safely rather than risk the battery. LiFePO4 is already the most thermally stable lithium chemistry, but this extra layer means you can put the UPS in less-than-ideal spots without lying awake at night.
CPU-Controlled Smarts That Run Themselves
The brain of the F-Li is a microprocessor that handles all the decision-making. When utility power fails, it switches to battery so fast your desktop doesn't blink. When the grid comes back, it auto-restarts without you reaching for a button. There's also automatic offline charging: plug the UPS into the wall with the unit switched off, and it still charges the battery. That's perfect if you only fire up the workstation a few times a week, or if you're prepping equipment and want a full battery before powering anything on. The input voltage window is wide, so it doesn't nervously bounce onto battery for every minor sag or surge. It rides through the little stuff, preserves the battery for real blackouts, and extends the overall life of the pack.
Protections That Do Their Job Quietly
Overload and short-circuit protection are built in. Battery low-voltage protection cuts in to prevent a damaging deep discharge. It's all standard, but the execution is where it matters—no drama, no cryptic error codes, just a clean, safe shutdown if something goes wrong.
Where the 800 / 1200VA F-Li Fits
This isn't a UPS for a rack full of switches. It's built for the places where a single workstation holds your livelihood or a small business's daily operations:
`Desktop PCs and all-in-one computers: Enough backup time to save work and shut down, plus steady voltage that stops your power supply from slowly frying.
`Large monitors and external drives: Keeps the whole desk alive through short blips.
`Home office routers and NAS devices: A single unit can cover the networking gear and the workstation, cutting down on cable spaghetti.
`Small printers and point-of-sale terminals: Nothing tanks a customer transaction faster than a flicker. The F-Li holds the line.
`Freelancers and remote workers: If a power hiccup costs you billable hours, the F-Li pays for itself the first time it stops a crash.
The Modern Workstation UPS
The F-Li Series 800 / 1200VA takes everything that makes the smaller lithium UPS units appealing—light weight, long life, silence—and stretches it to a size that can genuinely protect a full desktop setup. You get the lithium advantage without the weight penalty, a silence mode that makes living with a UPS bearable, and a BMS that actively manages battery health instead of just reacting to failure. If you're tired of lead-acid bricks that need replacing every two years and beep at you through every storm, this is the clean, quiet, modern replacement your desk deserves.